Public Missiles Ltd. Accufire Staging Timer

Price: $89.99

Brief Description

Detailed Description

Specifications

PML AccuFire Staging Timer

Introducing the PML AccuFire Staging timer. This state-of-the-art timer has been developed by G-Wiz Partners exclusively for Public Missiles Ltd. The AccuFire was especially designed for use with the PML Inter-Stage 3000 system used with all of PML`s 2 stage rocket kits. The AccuFire can also be used in scratch-built staging, air start, and deployment systems. PML and G-Wiz spent many months designing and testing the AccuFire to make sure it would be the safest, most reliable, and easiest to use timer on the market. Take a look at the specs and features:

Uses an on-board, standard 9VDC alkaline battery.
Provides up to 1.25A output current to the pyro channel.
Over 5-hour battery life.
15 selectable delay times with audible time beeper. Time adjustable through DIP switches.
Delay Times: 0s, 0.5s, 1s, 2s, 3s, 4s, 5s, 6s, 7s, 8s, 9s, 10s, 15s, 20s, 25s.
Continuous, audible continuity verification.
Easily fits inside PML PT-1.525 (38mm) airframe tubing.
4.0" L x 1.4" W x 1.0" H
Weight approx. 2.8 oz./77 grams with battery.
UL recognized positive retention wire gripping terminals, AWG 14-30 gauge wire.
Especially designed for our Interstage 3000 system (The Interstage 3000 system is also used in PML`s two-stage rocket kits: Thunder `n` Lightning, Quantum Leap 3000, and MiniBBX w/Terrier Booster)
Can be used in scratch-built systems too. IS-3000-FTM and IS-3000-ATM mounts (available below and on Staging page) allow for use in any 38mm altimeter bay.
Bench test mode to verify operation of the timer and to test the pyro circuit with your desired ignition device.
Safe and easy to use*.
Complete and in-depth instruction manual
Warranty 180 days, through G-Wiz Partners.

Click here for the PML AccuFire Timer Instructions in PDF format.

IMPORTANT CUSTOMER ALERT:

For the AccuFire to function as a 2nd stage ignition device, you MUST use:
         1) BlackSky HiRMI Standard electric match (preferably dipped in pyrogen) or
         2) DaveyFire N28F (preferably dipped in pyrogen).

For the AccuFire to function as an ejection charge initiator the following electric matches could also be used:
         3) 1 or 2 above (without the pyrogen dip),
         4) BlackSky HiRMI - Sensitive,
         5) DaveyFire N28B, or
         6) Oxral.

Other ignition devices WILL NOT FUNCTION PROPERLY with the AccuFire.

* Like the G-Wiz LC, LC Deluxe, and MC, AccuFire uses a progressive launch detect algorithm. The timer must sense either 2g for 0.5 seconds, or 4g for 0.25 seconds, or 8g for 0.125 seconds to determine that launch has occurred and begin monitoring for motor burnout. Accelerometer-based detection of motor burnout occurs upon detection of deceleration (negative g`s) after launch detection; the timing to the firing event begins at motor burnout.

E-mail a friend about this item.

Return to Catalog